Instruction – M12 adapter
The M12 Lens Adapter replaces the 2.8-12mm cs-mount lens.
Screw the M12 lens into the M12 adapter.
Blow the dust off the IR filter and M12 lens. Do not touch the lens with your hands.
Mount the M12 adapter onto the CS mount, replacing the original lens.
Set focus by adjusting the lens to a subject approximately 120 cm (47 in) away.
If sharpness cannot be achieved, loosen the CS-mount locking ring screw and readjust.
Adjust focus via the 10x or 13x eyepiece diopter.
Once focus is correct, lock the adapter securely in place.
The adapter is eccentric and allows framing adjustment. Rotate the adapter to fine-tune image positioning.
It is compatible with the SDI camera.
To use with HDMI, you musst remove the IR filter of the video-assist camera.
10× M12 Lens Adapter compatible with all 10× adapters for Bolex cameras with a 10× viewfinder.
Newsletter
Join our community and get the latest news, sales and updates.
We use cookies to keep the shop working and, with your consent, to measure visits. You can accept, refuse, or choose by category, and change your mind at any time.
